MOAR stickers

I'm in a Pentium PC craze and I'm trying to build myself a test bench for a socket 5/7 motherboard. Why? Well - the computer/case that I'm using is HUGE, dirty, yellowed and is missing the side panels and doors. A test bench would allow me to quickly swap out hardware for different operating systems or swap CPUs or RAM for testing performance. I blame RMC was playing with a Packard Bell Multimedia Executive PC on his channel recently and I got mine out of the attic, however, the machine is special to me, so I didn't want rip it to pieces. 



So whilst up there, I decided to get my old Elonex server/PC out to use this as a basis for my test bench. This PC was the Novell NetWare 3.12, then later 4.11 server for the office of the construction company I used to work at. When we upgraded to NT 4 this machine was defunct and I was allowed to bring it home. 

I took it to pieces and laid it out on a piece of cardboard but it was a mess and stuff everywhere, so I decided to try and make my own.


Here's where I'm at:


But what has this got to do with stickers? Well I went down a rabbit hole that I often go down whilst doing retro projects. I decided that once the test bench is finished, it needed a Pentium sticker on it. So off to eBay I went. I found a seller in Texas who had some new old stock stickers so bought some. The CPU in the test bench is a 100MHz Pentium so for that machine I got an original Intel inside sticker, but I'd upgraded the Packard Bell's CPU from the original 133MHz Pentium to a 200MHz Pentium with MMX technology(!) at some point. So I decided I wanted an MMX sticker for that machine. After a few weeks of wait they arrived, and here they are! Aren't they pretty?


 I have to admit, the silver Intel Inside with the MMX logo is my favourite. Which one is yours?



Comments

Post a Comment

Popular posts from this blog

Capturing VGA - Part 1

Image
A few years back I decided that I wanted to do some VGA capture from my old vintage computers so I could show it off in my YouTube videos. This lead me down a dark hole to try and get a working solution. I'd seen a couple of cheap VGA capture devices on eBay so bought a few to try. None of them were successful. I tried several different ways of doing it and I was pulling my hair out until  I stumbled upon a video by a fellow retro computer enthusiast called Victor Bart . He has done a fantastic video on the way he does it.  Rather than trying to reinvent the wheel I figured I'd give his solution a go. The only thing I changed was the capture card - mine is USB, not PCI-E. The secret sauce is the VGA scaler. Many older machines and games in DOS output at strange resolutions and switch between them frequently. Most of which these newer cheap VGA capture devices don't support these old resolutions. For example: the Windows 98 start up screen displays at something like 720x400....
Read more

Capturing VGA - Part 5

Image
I'm hoping that this will be the last post about how I capture VGA from my old retro machines as I think I now have a solution that works well. It also captures audio and injects that into the HDMI signal too.  So what's different from my last four posts? Well not much to be honest, other than I've changed the powered VGA splitter I'm using. For some reason, the two Startech splitters I bought, and worked fine, for some reason have introduced a flicker on my capture machine. So much so that the video is unusable. I've tried different cables and I even bought an identical one thinking my existing one was faulty. I went back to using the unpowered splitter cable, even though it produced a noticably darker image which I could fix in edting.  I'm on a discord server where a fellow YouTuber mentioned what they use, so off to eBay I went and I managed to purchase this: It's an Extron P/2 DA4xi 1:4 Four-Output VGA Video Distribution Amplifier DA - basically a power...
Read more

Stray for macOS released!

Image
I was desperate to play this game since it was announced and I was excited to hear it coming over to Apple Silicon. On launch day I downloaded it and I've so far been blown away by the graphics that my little M2 Mac mini is able to output. Here's a screenshot of some game play from my actual Mac mini.  The only thing I don't like about it is the Zurks! And if you know, you know ;)  I haven't finished the game yet but I just wanted to mention how gorgeous this game is and I'm super excited about it being available on the Mac. 
Read more